The effect of vascular diseases on bioimpedance measurements: mathematical modeling

Authors

  • Yomna H. Shash Department of Biomedical Engneering, Faculty of Engineering, Helwan University, Egypt http://orcid.org/0000-0002-5931-3410
  • Mohamed A. A. Eldosoky Department of Biomedical Engneering, Faculty of Engineering, Helwan University, Egypt
  • Mohamed T. Elwakad Department of Biomedical Engneering, Faculty of Engineering, Helwan University, Egypt

DOI:

https://doi.org/10.15419/bmrat.v5i6.453

Keywords:

Aneurysm, Atherosclerosis, Bioimpedance, Cardiovascular, Occlusion, Plaques, Vascular

Abstract

Introduction: The non-invasive nature of bioimpedance technique is the reason for the adoption of this technique in the wide field of bio-research. This technique is useful in the analysis of a variety of diseases and has many advantages. Cardiovascular diseases are the most dangerous diseases leading to death in many regions of the world. Vascular diseases are disorders that affect the arteries and veins. Most often, vascular diseases have greater impacts on the blood flow, either by narrowing or blocking the vessel lumen or by weakening the vessel wall. The most common vascular diseases are atherosclerosis, wall swelling (aneurysm), and occlusion. Atherosclerosis is a disease caused by the deposition of plaques on the inner vessel wall, while a mural aneurysm is formed as a result of wall weakness. The main objective of this study was to investigate the effects of vascular diseases on vessel impedance. Furthermore, this study aimed to develop the measurement of vessel abnormalities as a novel method based on the bioimpedance phenomenon.

Methods: Mathematical models were presented to describe the impedance of vessels in different vascular cases. In addition, a 3D model of blood vessels was simulated by COMSOL MULTIPHYSICS.5, and the impedance was measured at each vascular condition.

Results: The simulation results clarify that the vascular disorders (stenosis, blockage or aneurysm) have significant impact on the vessel impedance, and thus they can be detected by using the bio-impedance analysis. Moreover, using frequencies in KHz range is preferred in detecting vascular diseases since it has the ability to differentiate between the healthy and diseased blood vessel. Finally, the results can be improved by selecting an appropriate electrodes configuration for analysis.

Conclusion: From this work, it can be concluded that bioimpedance analysis (BIA) has the ability to detect vascular diseases. Furthermore, the proposed mathematical models are successful at describing different cases of vascular disorders.

Author Biography

  • Yomna H. Shash, Department of Biomedical Engneering, Faculty of Engineering, Helwan University, Egypt
    eng.yomna_hassan@yahoo.com

Published

2018-06-30

Issue

Section

Original Research

How to Cite

The effect of vascular diseases on bioimpedance measurements: mathematical modeling. (2018). Biomedical Research and Therapy, 5(6), 2414-2431. https://doi.org/10.15419/bmrat.v5i6.453

Similar Articles

61-70 of 92

You may also start an advanced similarity search for this article.